44
6
Filter
Filter for the episcopic illumination
Two filter sliders are located near the rear side of the epi illuminator. Each slider can hold two
filters. Push in or pull out the filter sliders to locate the desired filters.
See Page 83 for the filter attaching method.
Filters
NCB11 (neutral color balancing filter)
ND4 (ND filter)
ND16 (ND filter)
GIF (green interference filter)
IF (interference filter)
Usage
For color balancing and color photomicrography
For brightness control (transmittance: 25%)
For brightness control (transmittance: 6%)
For contrast control
For interference
Filter for the diascopic illumination
Following two filters are mounted in the base unit of the microscope.
The switches for inserting and retracting the filters are provided on the right side of the microscope.
Lower the switch to insert the filter in the optical path, and raise the switch to remove it from the
optical path.
Filters
NCB11 (neutral color balancing filter)
ND8 (ND filter)
Usage
For color balancing and color photomicrography
For brightness control (transmittance: 12.5%)
To Next Page
Loading...
Need help?
General
