Nikon N 5 User Manual

5 Menu Key
104 Nikon N Series/K Series Total Station Instruction Manual
When you have entered three points, the
instrument calculates the angle and distances.
5. Do one of the following:
– To return to the Inverse menu, press [ENT].
– To return to the Input BasePt screen, press
[ESC].
Calculating and manually inputting coordinates
To enter the Input menu, press [2] or select Input in
the Cogo menu. There are three functions in this menu
for recording new coordinate points.
Azimuth+HD input
To calculate a coordinate by an angle and distance
input from the base point (P1), press
[1] or select
AZ+HD in the Input menu.
Enter the base point (P1). Type the point name and
press
[ENT].
Enter the azimuth, horizontal distance, and vertical
distance. Then press
[ENT].
To enter 123°45'45", type 123.4545 and press
[ENT].
If you do not enter a value in the dVD field, the value
0.000 is used.
A recording point screen with the calculated
coordinates appears. PT defaults to the last recorded
PT + 1.
Press
[ENT] to store the point.

Nikon N 5 Specifications

General

Brand	Nikon
Model	N 5
Category	Measuring Instruments
Language	English