Nikon N 5 User Manual

Nikon N Series/K Series Total Station Instruction Manual 37
Getting Started 3
[HOT] key
The HOT key menu is available on any observation
screen. To display the HOT key menu, press
[HOT].
Changing the height of the target
To change the height of the target, press
[HOT] to display
the HOT menu. Then either press
[1] or select HT and
press
[ENT].
Enter the height of the target, or press the
Stack
softkey to display the HT stack. The HT stack stores
the last 20 HT values entered.
Setting the temperature and pressure
To set the current temperature and pressure, press
[HOT]
to display the HOT menu. Then either press
[2] or select
Temp-Press and press [ENT]. Enter the ambient
temperature and pressure. The ppm value is updated
automatically.
Selecting the target set
A target set specifies settings for the target type, the
prism constant, and height of target. When you change
the selected target set, all three settings are changed.
You can use this function to quickly switch between
two types of target, such as a prism. You can prepare
up to five target sets.
Press
[HOT] to display the HOT menu. Then either press [3], or select Target and press
[ENT]. A list of the five target sets appears. To select a target set, either press the
corresponding numeric key (
[1] through [5]), or use [^] or [v] to highlight the target set in
the list and press
[ENT].

Nikon N 5 Specifications

General

Brand	Nikon
Model	N 5
Category	Measuring Instruments
Language	English