Nikon N 5 User Manual

5 Menu Key
120 Nikon N Series/K Series Total Station Instruction Manual
Communications
To open the Communication menu, press [5] or select
Comm. in the Settings menu.
Stakeout
Press [6] or select Stakeout in the Settings menu to
open the Stakeout menu.
.
Unit
To open the Unit menu, press [7] or select Unit in the
Settings menu.
Ext.Comm NIKON/SET
Port Serial/BT to contr.
Baud 1200/2400/4800/9600/19200/38400 bps
Length 7/8
Parity EVEN/ODD/NONE
Stop bit 1/2
Add PT Integer between 1 and 999,999
This field sets the default point number to record observed data in stakeout.
Angle DEG (Degree)
GON (GON)
MIL (Mil6400)
Distance Meter/US-Ft/I-F
If you select US-Ft or I-Ft, an additional settings screen appears. Use this
screen to specify whether to display values in Decimal-Ft or
Ft-Inch.
Tem p ° C (C els iu s)
°F (Fahrenheit)
Press hPa/mmHg/inHg
The Angle, Distance, Temp, and Press job settings cannot be changed once a job is created.

Nikon N 5 Specifications

General

Brand	Nikon
Model	N 5
Category	Measuring Instruments
Language	English