5 Menu Key
154 Pulse Laser Station NPL-302 Series Instruction Manual
Entering coordinates 50.2
In the XYZ screen, press the Input softkey to
display a new input point screen.
The PT field defaults to the last recorded PT + 1,
but you can change the value shown.
Enter the PT and CD and then press
[ENT] to enter
coordinates.
Use the numeric keys to enter the coordinates.
Press
[ENT] or [v] in each field to move to the next
field.
When you press
[ENT] in the CD field, the point is
stored as an MP record.
After you have recording a point, the next point
input screen is shown with the updated default PT.
Point name list and code list 50.3
The instrument stores two list files: a list of PT names and a list of CD names. The
structure and functionality of these files is the same.
•The PT name list is useful if you have to handle more than one patterns of point
names in the field. For example, you may need to use points named 1, 2, 3 …, as
well as points named A1, A2, A3 ….
•The code list is a prepared list of feature codes. You can use it to store your own
codes.
You can record NE, NEZ, or Z-only data to the database.
To Next Page
Loading...
Need help?
General
