Nikon NPL-352 User Manual

2 Preparation
22 Pulse Laser Station NPL-302 Series Instruction Manual
Setting Up the Prism Reflector 2.3
The prism reflector is also for measurements in Prism mode.
1. Assemble the prism reflector as shown in Figure 2.4.
Figure 2.4 Assembling the prism reflector
2.
Adjust the height of the tribrach adaptor (see page 23).
3. If necessary, change the direction of the prism (see page 23).
4. Set the prism constant (see page 23).
5. Set the position of the target plate (see page 24).
Detailed instructions for Step 2 through Step 5 are provided on the following pages.
Target plate for single prism
Tiltable single
prism holder
Tribrach adapter 13/14
Leveling base W10/W11
Tripod
Prism C
Target plate for single prism
Prism C
Tribrach adapter 13/14
Leveling base
Tr ip od
Tiltable single
prism holder

Nikon NPL-352 Specifications

General

Brand	Nikon
Model	NPL-352
Category	Measuring Instruments
Language	English