3 Getting Started
38 Pulse Laser Station NPL-302 Series Instruction Manual
Adjusting lighting and sound levels 31.2
LCD backlight
To turn the LCD backlight on or off, press the illumination key . To adjust the
backlight level, use the 2-switch window described below.
2-switch window
Use the 2-switch window to adjust lighting and
sound settings for the instrument.
To open the 2-switch window from any screen,
hold down the Illumination key for one second.
To cycle through the settings for a switch, press
the number beside that switch. For example, to
turn the backlight on or off, press
[1].
Alternatively, to highlight the switch that you want to set, press
[^] or [v]. Then press
[ENT] to cycle through the settings for that switch.
Switch 1 (backlight)
Switch 2 (Sound)
Contrast adjustment window
When the 2-switch window is open, press [<] or [>]
to display the contrast adjustment window. Then
press
[^] or [v] to change the contrast level. The
arrow indicates the current contrast level. To
return to the 2-switch window, press
[<] or [>].
When you have finished changing display light
and sound settings, press
[ESC] to close the
2-switch or contrast adjustment window.
LCD backlight is on.
LCD backlight is off.
Sound is on.
Sound is off.
To Next Page
Loading...
Need help?
General
