Getting Started 3
Pulse Laser Station NPL-302 Series Instruction Manual 55
Qcodes
Quick codes (Qcodes) let you shoot and record
many points with feature codes in the field. You
can register up to ten Quick codes. To register
Qcodes, press the
Edit softkey. For more
information, see Quick code measurement mode,
page 41.
Entering values in feet and inches 32.3
When either US Survey Feet (US-Ft) or International Feet (I-Ft) is selected as the
distance unit, you can enter and display distances, HIs, HTs, and coordinate values
either in decimal feet, or in feet and inches For more information, see Unit,
page 139, and Others settings, page 140.
To enter values in feet and inches in an input screen, enter the elements, separated
by periods (.), in the following format:
The default denominator is 16. If the denominator
is 16, you do not have to enter it, and it is not
displayed on the screen.
For example, if you enter
[2] [.] [0] [8] [.] [5] [.] [ENT], it appears as 2'08& 5/ (2
feet, 8 and 5/16ths inches).
Press [MODE] to switch Qcodes on or off.
Press the Edit softkey to change the Qcode. You can edit the entire code, or just
the number at the end of the code.
You can still use [DSP] to change the background displays.
<Feet> [.] <Inches> [.] <Numerator> [.] <Denominator> [ENT]
(0–11) (0–15) (0–99)
To Next Page
Loading...
Need help?
General
