Menu Key 5
Pulse Laser Station NPL-302 Series Instruction Manual 167
If the highlighted part of the field (for example, the year) is already correct, you
can just press
[ENT] to use the current value. For example, if the date is already
set to June 24, 2002, and you want to change the date to June 18, 2002, press
[ENT] [ENT] [1] [8] [ENT].
3. To move to the Time field, press [ENT] in the
Date field.
4. Enter the time in 24-hour format. For example,
to set the time to 4:35 PM, press
[1] [6] [ENT] [3] [5] [ENT].
5. Do one of the following:
– To finish setting the date and time, press
[ENT] in the Minutes field.
– To cancel the input, press
[ESC].
To Next Page
Loading...
Need help?
General
