2-16 Operating 15088: K 3/21/01
Status: ON, TROUBL, OFF, REQEST*, or blank. 20-Character Custom Label
OFF@@@@ANN@CONTROL@@@ANNUNCIATOR@ONE
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@A01P23
Software Type ID Address
Read Status Menu
Options 3 - 7
PRESS 1=SYS,2=PTREAD,3=ALM,4=TBL,5=DIS,
6=MONON,7=CTLON@@@@@@@@@@@@@@@@@@@@@@:@3
DO@YOU@WANT@ZONE@OR@DEVICE@STATUS?
(Y=ZONE,N=DEVICE@(BCKSPC@TO@ABORT))@@:@N
ALARM:@SMOKE(ION)@@@COMPUTER@ROOM@SMOKE
@@@@@@A@@@@@@@@@@@@@@@@@M@034@@@@@L02D26
Option 3 provides information on devices or zones in a fire alarm state. Option 4 provides information on
devices or zones in a trouble state. Option 5 provides information on disabled devices or zones. Option 6
provides information on activated non-fire or security monitor modules. Option 7 provides information on
activated control modules. Selecting 3, 4, or 5 from the Read Status Menu prompts the operator to choose
between zones and devices. The following example performs a search for the lowest device in a fire alarm
state.
NOTE
The control-by-event and the annunciator point mapped address is displayed for devices and zones
after a one minute timeout. In a NOTI•FIRE•NET system, cooperative control-by-event equa-
tions are displayed for reverse zones. To display this information immediately, press ENTER
after the status line appears.
Special Status
Annunciator Points
*A REQEST status indicates that a telephone off-hook (ring-in) signal has been received and
answered by the operator at the fire fighter telephone ACS switchboard, but has not been
connected to the telephone line.
To Next Page
Loading...
Need help?
General
