Notifier AFP1010 User Manual

1-5
Installation 15088: K 3/21/01
Section One
Installation Overview
Section 1.1 Basic Equipment
The basic equipment package for the Notifier AM2020 is the BE-2020N and the basic equipment package
for the Notifier AFP1010 is the BE-1010N. The following list may be used to identify the components pro-
vided in a BE-2020N and/or BE-1010N shipment. Refer to Appendix B of this manual for an optional equip-
ment listing.
Cables:
MPS/ICA Power Cable (75378)
CPU/MPS Supervisory Cable (71031)
BP-3 Battery Dress Panel
CPU-2020 (BE-2020N) or CPU-2 (BE-1010N) Central Processor Unit
DIA-1010 or DIA-2020 Display Interface Assembly
CPU to DIB Cable (75226)
ICA-4L Interconnect Chassis Assemblies
Refer to Section Six, Standard Specific Requirements, for minimum system equipment
requirements.
Section 1.2 Related Documentation
To obtain a complete understanding of specific features within the AM2020/AFP1010 or to become familiar with
functions in general, make use of the documentation noted in Table 1.2-1.
VeriFire™ is a Windows® 95/98 based software program which provides an off-line programming and test utility
designed to reduce installation programming time.
The Notifier Document chart (DOC-NOT) provides the current document revision. A copy of this document is
included with each shipment of Notifier products.

Notifier AFP1010 Specifications

General

Brand	Notifier
Model	AFP1010
Category	Fire Alarms
Language	English