4-20
Security 15088:K 03/21/01
Contact Switch w/Monitor Module:
Address: LXXMYY (Installer Specified).
Type ID: SACM
Control-By-Event: (Zac*)
Custom Label: Entry/Exit Door
Tracking: Yes
Annunciator: Yes
Annunciator Point: ArrP3
RKS-S Remote Keyswitch w/Monitor Module:
Address: LXXMYY (Installer Specified).
Type ID: NOA
Control-By-Event: (Zab*)
Custom Label: Arming Switch
Tracking: Yes
Annunciator: Yes
Annunciator Point: AssPl**
Security Access Monitor Module:
Address: LXXMYY (Installer specified).
Type ID: SACM
Control-By-Event: (Zaa*)
Custom Label: Installer Option (describe specific
location of module).
Tracking: Yes - Each unsecured state and
restoral will be printed on the PPU
printer when the print option is en-
abled.
No - The first unsecured state will be
printed on the PPU printer when the
print option is enabled (restorals will
not print on the PPU printer until the
PPU is reset locally or at the Central
Station - short condition only).
Annunciator: Yes
Annunciator Point: ArrP4
The following programming key relates to Figure 1.3-10:
To Next Page
Loading...
Need help?
General
