Nvidia DGX-1 User Manual

Installation and Setup
www.nvidia.com
NVIDIA DGX-1 DU-08033-001 _v13.1|10
‣
Network: Dual 10GBASE-T RJ45 connection
Use industry standard CAT6 Ethernet cables for connecting to the network ports.
(Cables not included.)
‣
IPMI: 10/100BASE-T RJ45 connection
Use industry standard CAT6 Ethernet cables for connecting to the network ports.
(Cables not included.)
‣
InfiniBand: Qty 4 - QSFP28 ports, InfiniBand and Ethernet compliant
Use Mellanox-compliant InfiniBand cables for connecting to the InfiniBand ports.
(Cables not included.)
Preparing for Network Access
‣
The IPMI port and Ethernet ports can be connected to your local LAN.
These ports are configured for DHCP by default.
‣
To use DHCP, connect the port to a local DHCP server which should provide an
IP address and assign a DNS configuration to the DGX-1.
‣
If DHCP is not available, then you will need to set up a static IP for each
Ethernet port.
‣
NVIDIA recommends that customers follow best security practices for BMC
management (IPMI port). These include, but are not limited to, such measures as:
‣
Restricting the DGX-1 IPMI port to an isolated, dedicated, management network
‣
Using a separate, firewalled subnet
‣
Configuring a separate VLAN for BMC traffic if a dedicated network is not
available
‣
Make sure your network can connect to the following:
‣
http://us.archive.ubuntu.com/ubuntu/
‣
http://security.ubuntu.com/ubuntu
‣
http://international.download.nvidia.com/dgx1/repos/ (Base OS Software 2.x or
earlier)
‣
http://international.download.nvidia.com/dgx/repos/ (Base OS Software 3.1 or
later)
‣
https://apt.dockerproject.org/repo
If access to those URLs requires use of a proxy, refer to Setting Up a System Proxy
for setup instructions.
2.4.Unpacking the DGX-1
1.
Remove the shrinkwrap.

Nvidia DGX-1 Specifications

General

Brand	Nvidia
Model	DGX-1
Category	Desktop
Language	English