EasyManuals Logo
Home>Nvidia>Desktop>DGX-1

Nvidia DGX-1 User Manual

Nvidia DGX-1
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Preparing for Using Docker Containers
www.nvidia.com
NVIDIA DGX-1 DU-08033-001 _v13.1|21
Ensure your environment meets the prerequisites before installing Docker. For more
information, see Getting Started with Docker.
1.
Install Docker.
$ sudo apt-key adv --keyserver
hkp://p80.pool.sks-keyservers.net:80 --recv-keys
58118E89F3A912897C070ADBF76221572C52609D
$ echo deb https://apt.dockerproject.org/repo ubuntu-trusty main
| sudo tee /etc/apt/sources.list.d/docker.list
$ sudo apt-get update
$ sudo apt-get -y install docker-engine=1.12.6-0~ubuntu-trusty
2.
Edit the /etc/default/docker file to use the Overlay2 storage driver.
a) Open the /etc/default/docker file for editing.
$ sudo vi /etc/default/docker
b) Add the following line:
DOCKER_OPTS="--storage-driver=overlay2"
If there is already a DOCKER_OPTS line, then add the parameters (text between
the quote marks) to the DOCKER_OPTS environment variable.
c) Save and close the /etc/default/docker file when done.
d) Restart Docker with the new configuration.
$ sudo service docker restart
3.
Install NVIDIA Docker.
The following example installs both nvidia-docker and the nvidia-docker-plugin.
$ wget -P /tmp
https://github.com/NVIDIA/nvidia-docker/releases/download/v1.0.1/nvidia-
docker_1.0.1-1_amd64.deb
$ sudo dpkg -i /tmp/nvidia-docker*.deb && rm
/tmp/nvidia-docker*.deb
3.2.Configuring Docker IP Addresses
To ensure that the DGX-1 can access the network interfaces for nvidia-docker containers,
the nvidia-docker containers should be configured to use a subnet distinct from other
network resources used by the DGX-1.
By default, Docker uses the 172.17.0.0/16 subnet. Consult your network
administrator to find out which IP addresses are used by your network. If your network
does not conflict with the default Docker IP address range, then no changes are needed
and you can skip this section.
However, ff your network uses the addresses within this range for the DGX-1,
you should change the default nvidia-docker network addresses. The method for
accomplishing this depends on the Base OS software version installed on the DGX-1.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nvidia DGX-1 and is the answer not in the manual?

Nvidia DGX-1 Specifications

General IconGeneral
BrandNvidia
ModelDGX-1
CategoryDesktop
LanguageEnglish

Related product manuals