Nvidia DGX-1 User Manual

Maintaining and Servicing the NVIDIA DGX-1
www.nvidia.com
NVIDIA DGX-1 DU-08033-001 _v13.1|56
5.5.1.Replacing the System
When returning a DGX-1 under RMA, consider the following points.
SSDs
If necessary, you can remove and keep the SSDs prior to shipping the system back for
replacement. If you already received a replacement system and you want to keep the
original SSDs, install the new SSDs into the defective system when shipping it back.
Bezel
Be sure to include the bezel when returning the system.
5.5.2.Replacing an SSD
Access the SSDs from the front of the DGX-1. You can hot swap the SSDs as follows:
1.
If not already removed, remove the bezel by grasping the bezel by the side handles
and then pulling the bezel straight off the front of the DGX-1.
CAUTION: Be careful not to accidentally press the power button that is on the
right edge of the DGX-1 when removing or installing the bezel.
2.
Locate the SDD that you want to replace, then press the round button at the top
edge to release the latch.
3.
Pull the latch down and then out to unseat the SSD assembly.
4.
Continue pulling the SSD assembly to completely remove it from the unit.
5.
Using a phillips screwdriver, remove the four screws attaching the SSD to the hot-
swap tray.

Nvidia DGX-1 Specifications

General

Brand	Nvidia
Model	DGX-1
Category	Desktop
Language	English