Installation and Setup
www.nvidia.com
NVIDIA DGX-1 DU-08033-001 _v13.1|13
CAUTION: The DGX-1 weighs approximately 134 lbs, so an equipment lift is required to
safely lift the unit and then accurately align the chassis rails with the rack rails.
a) Align the inner chassis rails with the front of the outer rack rails.
b) Slide the inner rails into the outer rails, keeping the pressure even on both sides
(you may have to depress the locking tabs when inserting).
When the DGX-1 has been pushed completely into the rack, you should hear the
locking tabs "click" into the locked position.
3.
Lock the unit in place using the thumb screws located on the front of the unit.
2.7.Attaching the Bezel
The bezel is designed to attach easily to the front of the DGX-1.
1.
Prepare the DGX-1 by making sure that the power supply handles (located at the
power supply fans) are flipped up.
To Next Page
Loading...
Need help?
General
