Need help?Do you have a question about the Nvidia DGX-1 and is the answer not in the manual?
General| RAM | 512 GB DDR4 |
|---|---|
| Form Factor | 4U Rackmount |
| CPU | 2 x Intel Xeon E5-2698 v4 |
| Storage | 4 x 1.92 TB NVMe SSD |
| Network | Dual 10 GbE |
| Interconnect | NVIDIA NVLink |
| Power Supply | 3200W (redundant) |
| Operating System | Ubuntu Linux with NVIDIA DGX software stack |
| Dimensions | 19 in |
| GPU | 8x NVIDIA Tesla P100 GPUs |
Detailed specifications of the DGX-1's hardware components.
Procedures for mounting the DGX-1 into a server rack.
Guide for connecting Ethernet and IPMI network cables.
Initial system configuration process after powering on the DGX-1.
Installing Docker and NVIDIA Docker for older DGX OS versions.
Configuring Docker network IP addresses to prevent conflicts.
Introduction to the Baseboard Management Controller (BMC) for system management.
Setting a static IP address for the BMC.
Setting static IP addresses for network interfaces.
Procedures to restore the DGX-1 software image to factory settings.
Remotely updating the system BIOS via the BMC.
Remotely updating the BMC firmware using the IPMI port.
Overview of replaceable components and RMA process.
General safety warnings and cautions for DGX-1 operation.
To Next Page
