Nvidia Jetson Orin NX Series User Manual

Display
PRELIMINARY INFORMATION
Jetson Orin NX Series and Jetson Orin Nano Series DG-10931-001_v1.1 | 58
Table 9-6. HDMI Signal Connections
Module Pin Name
Type
Termination (see note on ESD)
Description
DP1_TXD3_N/P
DIFF
OUT
0.1uF series ACCAP PD (controlled by FET)
ESD to GND . S (series resistor)
HDMI Differential Clock: Connect to C
/C+ and pins on HDMI connector
DP1_TXD[2:0]_N/P
DIFF
OUT
HDMI Differential Data: Connect to HDMI
Data pins (Table 9-2)
DP1_HPD
I
level shifter
GND on
connector side GND
to GND.
HDMI Hot Plug Detect: Connect to HPD
pin on HDMI connector
HDMI_CEC
I/OD
Gating circuitry, See connection figure for details.
HDMI Consumer Electronics Control:
Connect to CEC on HDMI connector
through circuitry.
DP1_AUX_N/P
I/OD
level shifter
ESD to GND. See connection
figure for level shifter details.
HDMI: DDC Interface Clock and Data:
Connect DP1_AUX_N to SDA and
DP1_AUX_P to SCL on HDMI connector
HDMI 5V Supply
P
Adequate decoupling (0.1uF and 10uF
recommended) on supply near connector and ESD
to GND.
HDMI 5V supply to connector: Connect
to +5V on HDMI connector.
Note: Any ESD and/or EMI solutions must support targeted modes (frequencies).

Nvidia Jetson Orin NX Series Specifications

General

Brand	Nvidia
Model	Jetson Orin NX Series
Category	Control Unit
Language	English