PRELIMINARY INFORMATION
Jetson Orin NX Series and Jetson Orin Nano Series DG-10931-001_v1.1 | 1
Chapter 1. Introduction
This design guide contains recommendations and guidelines for engineers to follow to create
a product that is optimized to achieve the best performance from the interfaces supported by
the NVIDIA
®
Jetson Orin NX and Jetson Orin Nano System-on-Module (SOM).
This design guide provides detailed information on the capabilities of the hardware module,
which may differ from supported configurations by provided software. Refer to software
release documentation for information on supported capabilities.
Notes:
• References to Orin module refers to the Jetson Orin module series. Modules include Jetson
Orin NX 16GB, Jetson Orin NX 8GB, Jetson Orin Nano 8GB, and Jetson Orin Nano 4GB.
• All occurrences of USB 3.2 refer to "USB 3.2 Gen 1x1: SuperSpeed USB 5Gbps" and "USB 3.2
Gen 2x1: SuperSpeed USB 10Gbps" only. Also note that Gen 1x1 and Gen 2x1 are referred to
simply as Gen1 and Gen2 in this design guide.
1.1 References
Refer to the following list of documents or models for more information. Use the latest
revision of all documents.
Jetson Orin NX Series Data Sheet
Jetson Orin Nano Series Data Sheet
Orin (SoC) Technical Reference Manual
Jetson Orin NX and Jetson Orin Nano Series Pinmux
Jetson Orin NX Series and Jetson Orin Nano Series Thermal Design Guide
Jetson Orin NX Series and Jetson Orin Nano Series SCL (Supported Component List)
To Next Page
Loading...
Need help?
General
