BA_OTE 3+4_Endkunde_EN_V03_20170726.docx Page 17 of 52
5.12 Set temperature for heating
Any change in the room temperature set value will automatically shift the heating curve
and change the heating limit (the heating curve is related to a room temperature set val-
ue of 20°C).
Set values Description
03-051 Room temperature
day heating operation
The desired normal room temperature is set here. (see
time program)
03-053 Room temperature
night time heating operation
The desired set-back room temperature is set here.
(see time program)
03-021 Heating limit outdoor
temperature
The desired heating limit is set here.
Settings procedure:
1. Press the adjustment knob in the main display
> the main menu appears
2. Select the Heating Circuit by turning the ad-
justment knob and confirm by pressing the
knob. > the temperature image for the heat-
ing circuit appears.
3. In heating circuit temperature image, select
the heating circuit menu by pressing the ad-
justment knob.
4. By turning the adjustment knob, select set-
tings in the main menu and confirm this by
pressing the knob.
5. By turning the adjustment knob, select target
temperature heating and confirm this by
pressing the knob.
6. Select the Room temp. day heating operation
by pressing the adjustment knob
7. Change/adjust the room temperature by turn-
ing the adjustment knob and store this by
pressing. > By repeated pressing of the ESC –
knob you return to the main display.
Target temperature heating
Target temperature cooling
To Next Page
Loading...
Need help?
General