BA_OTE 3+4_Endkunde_EN_V03_20170726.docx Page 37 of 52
15.2 Set master data
The system user can set master data (texts) in the control. The following master data are
settable:
• System owner's name
• Installer's name
• Planner's name
Settings procedure:
1. Press the adjustment knob in the main
display > the main menu appears
2. Select the Service Report by turning the
adjustment knob and confirm by pressing
the knob.
3. By turning the adjustment knob, select
Master Data in the Service Report menu
and confirm this by pressing the knob.
4. By turning the adjustment knob, select
Plant operator and confirm this by press-
ing the knob.
5. Delete text: Turn the adjustment knob
anticlockwise until the delete sign "<" ap-
pears beside the text. Delete the text by
pressing the knob. ESC - button to return
6. Store by pressing the settings knob > re-
peated pressing of the ESC knob returns to
main display.
To Next Page
Loading...
Need help?
General