BA_OTE 3+4_Endkunde_EN_V03_20170726.docx Page 36 of 52
14 Building Management
There is the possibility to transfer the heating/cooling set value from a building manage-
ment system to the heat pump control. This set value can be transferred by means of a
0-10V DC signal and a switching contact for heating/cooling. The control can furthermore
send certain operational conditions to the building management system (e.g.: Heat pump
running, heat pump in cooling operation. If you wish to use this function, please contact
your nearest OCHSNER system partner.
15 Service-Report
15.1 Setting date and time
Settings procedure:
1. Press the adjustment knob in the main
display > the main menu appears
2. Select the Service Report by turning the
adjustment knob and confirm by pressing
the knob.
3. By turning the adjustment knob, select
Settings in the Service Report menu and
confirm this by pressing the knob.
4. Select Time by pressing the adjustment
knob
5. Set the time of day by turning the adjust-
ment knob and store this by pressing.
6. > By repeated pressing of the ESC – knob
you return to the main display.
The automatic Summer-Winter time switch-over takes place on the last Sunday in Octo-
ber and on the last Sunday in March. By installing a room terminal with touch display, the
time of day can be automatically set on the OTE control. The date and time setting de-
scribed here is then of no effect.
Setpoint and actual values
The date can be set in the same way.
To Next Page
Loading...
Need help?
General