BA_OTE 3+4_Endkunde_EN_V03_20170726.docx Page 25 of 52
7.2 Time program for heating
Time program
Heating
Description
Holiday program
With this function, up to 7 time periods in which the these heating
circuits are switched off can be programmed.
(During this period, the system is controlled to frost protection tem-
perature to avoid the heating circuit freezing).
You can enter the holiday programme's start and end points. The
holiday programme starts and ends at 24:00 for each set day.
Party timer
By entering the time in minutes, the system can change to normal
operation during the set-back period.
Time program
The time at which the heating system in normal or set-back tempera-
ture runs can be defined in the week time program. (Set tempera-
ture, see Section 5.12/5.14)
Settings procedure:
1. Press the adjustment knob in the main
display > the main menu appears
2. Select the Heating Circuit by turning the
adjustment knob and confirm by pressing
the knob. > the temperature image for the
heating circuit appears.
3. In heating circuit temperature image, se-
lect the heating circuit menu by pressing
the adjustment knob.
4. By turning the adjustment knob, select
Settings in the heating circuit menu and
confirm this by pressing the knob.
5. By turning the adjustment knob, select
time program and confirm this by pressing
the knob.
6. By turning the adjustment knob, select the
desired time program and confirm this by
pressing the knob. > Adjust the time pro-
gram according to the description (see Sec-
tion 7.1)
Target temperature heating
Target temperature cooling
To Next Page
Loading...
Need help?
General