BA_OTE 3+4_Endkunde_EN_V03_20170726.docx Page 24 of 52
7 Time program
7.1 Settings procedure
Fig. 11: Time program display
Changing the time program:
Example: Set-back period setting from 20:00 to 5:00.
The following Sections (7.2, 7.3) show where to find each time program in the menu.
1. Select the day by turning the settings knob
Each day of the week can be separately se-
lected, or all the days of the week at one
time.
2. Position the cursor by turning the adjust-
ment knob and confirm this by pressing
the knob
3. Select the period to be changed (normal or
set-back operation) by pressing the ad-
justment knob.
4. Change/adjust the period by turning the
adjustment knob and store this by press-
ing.
5. Position the cursor once again by turning
the knob and repeat steps 3 - 4.
6. Confirm the setting by pressing the ad-
justment knob Return by pressing the ESC
knob. If required, select the next block.
7. Store the time program change/setting for
all the days by pressing the adjustment
knob.
Change period 00:00
economy operation
(reduced set value:
Room temperature
night/set-back, heating
Change period 00:00
economy operation
Set cursor position 20:00
Change period 05:00
economy operation
Set cursor position 00:00
Change period 00:00
normaly operation
To Next Page
Loading...
Need help?
General