BA_OTE 3+4_Endkunde_EN_V03_20170726.docx Page 27 of 52
8 Heat pump
The following modes of operation can be set:
Operation selection heat
pump
Description
0: Off
The heat pump is switched off.
NOTE:
Only switch the heat pump off in emergencies!
(If the heat pump operation selection = 0: is set, the next
heat generator will be called on
if heat is required. That could also be an electro auxiliary
1: Automatic
The heat pump operates in automatic mode. Dependent
on the heat demand, the heat pump will be automatical-
ly switched on and off. (recommended setting)
Settings procedure:
1. Press the adjustment knob in the main
display > the main menu appears
2. Select the heat pump by turning the ad-
justment knob and confirm by pressing the
knob. > the temperature image for the
heat pump appears.
3. In heat pump temperature image, select
the heat pump menu by pressing the ad-
justment knob.
4. By turning the adjustment knob, select
Operation mode selection in the heat
pump menu and confirm this by pressing
the knob.
5. Confirm the Operation mode heat pump
by pressing the adjustment knob
6. Change/set the operation mode by turning
the settings knob and store by pressing,
repeated pressing of the ESC knob returns
to main display.
Operation mode heat genera-
To Next Page
Loading...
Need help?
General