44015503TH Rev. 1
34 /
Oki Data CONFIDENTIAL
3. INSTALLATION
3.3 Printer installation instructions
• Install the printer in a location where the following temperature and humidity are met:
Ambient temperature: 10 - 32°C
Ambient humidity: 20 - 80 % RH (relative humidity)
Maximum wet-bulb temperature: 25°C
• Exercise caution to avoid dew condensation.
• If the printer is installed in a location with ambient relative humidity below 30%, use a
humidifier or antistatic mat.
Installation space
• Place the printer on a flat desk large enough to accommodate its footings.
• Provide enough spaces around the printer.
Plan view
Side view
To Next Page
Loading...
Need help?
General
