- 122 -
5. Management / Setting the Printer
You can set reception protocol (POP3, SMTP, etc.) so that the machine can receive e-mail.
1
Open the Web page of this machine.
Open the Web Page of This Machine
2
Log in as the administrator.
3
Select [Admin Setup].
4
Click [Network] > [Mail Server] on the left side of the screen.
5
Set the mail server based on the information on the setting information sheet if
necessary.
6
Click [Submit].
7
Click [E-mail] > [Receive Settings] on the left side of the screen.
8
Select [POP3] or [SMTP], and then click [To STEP2].
9
Set the POP3 protocol if necessary.
10
Click [Submit].
• View Information
•Paper Setup
This function is displayed only if you log in as the administrator of the machine.
E-mail Setup (Web Page) About Items That Can be Set or Checked
Item Description
Status Displays the current status of the machine. All the warnings and
errors that have occurred on the machine are displayed as "Alert
information". You can also check the operating status of each
network service, a list of machine information, and the IP address
that is set to the machine.
Print Count Displays the number of printouts.
Supplies Life Displays the remaining amount and lifetime of consumables.
Usage Report (This function is displayed only
if you log in as the administrator of the
machine.)
Displays the print statistics results.
Network You can check general information, the status of TCP/IP,
maintenance information, and other Network setting information.
System Displays the machine information.
To Next Page
Loading...
Need help?
General
