- 157 -
6. Utility Software
You can set so that you can maintain the connection with the original printer even after the IP
address of the device changes.
• You must have the administrator rights.
• The IP address may change if DHCP dynamically assigns IP addresses or the network administrator manually
changes the IP address of the printer.
1
Start OKI LPR Utility.
2
Select [Setup] from the [Option] menu.
3
Select the [Auto Reconnect] check box, and then click [OK].
1
Start OKI LPR Utility.
2
Select a device.
3
Select [Confirm Connections] from the [Remote Print] menu.
4
Click [Details].
5
Enter the web port number in [Port Numbers].
6
Click [OK].
Following the IP Address of the Registered Device
Automatically
Setting the Web Port Number of the Machine
To Next Page
Loading...
Need help?
General
