To Next Page

To Previous Page

Page: 69

Service Guide ML520/521

Chapter 3 Maintenance & Disassembly

3.2 DISASSEMBLY/ASSEMBLY PROCEDURES

General Information

This section contains the printer disassembly procedures. Only the removal procedures are explained

here. Reverse the procedure for the installation.

At the bottom of each procedure is a listing of the parts covered in that procedure. The Okidata part

number, item description, comment (RSPL, Option, Consumable) and cross-reference to Appendix B is

provided for each part. Items included in the Recommended Spare Parts List are indicated by the acronym

RSPL. N/A will appear where a part number is not available.

520 indicates that the item is specific to the Microline 520.

521 indicates that the item is specific to the Microline 521.

Both indicates that the item is common to both printers.

This Service Handbook lists the disassembly procedures for major components of the unit. Okidata DOES

NOT recommend disassembling a unit which is operating normally. If you decide to perform disassembly

during this training, Okidata recommends that you perform

only

the disassembly procedures for RSPL

items. All other procedures are provided to assist you in identifying parts. It is not likely that you will

perform these procedures while servicing the unit.

Be sure to read all notes, cautions, and warnings, as they contain important information regarding

disassembly / assembly.

Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Oki ML520 User Manual

Other manuals for Oki ML520