Management of this machine
- 205 -
6
Confirm the settings, and click [OK].
ï‚Ÿ For a self-signed certificate, follow on-screen instructions to close the web page, and proceed to
"
Enabling encryption settings".
ï‚Ÿ To obtain a certificate issued by a certificate authority, go to Step 7.
7
Send the CSR to the certificate authority by following on-screen instructions.
8
Click [OK].
9
Install the certificate from the certificate authority by following on-screen instructions.
10
Click [Submit].
See "Enabling encryption settings".
Importing a certificate and private key
This section describes how to import the certificate and private key from the web page.
You can also import the certificate and private key to use the certificate issued by an external certificate
authority.
1
Open the web page of this machine.
Opening the web page(P.200)
2
Log in as an administrator.
Logging in as an administrator(P.200)
3
Select [Admin Setup].
4
Select [Network] - [Security] - [SSL/TLS].
5
Select [Using Certificate and Private Key after imported] to import the certificate.
You can import a certificate in PKCS#12 format.
See "Enabling encryption settings".
Enabling encryption settings
You can enable the encryption settings after creating a certificate. This section describes how to enable the
encryption from the web page.
When the encryption is enabled, it will be encrypted from the communication immediately after changing the
setting from the web page.
1
Open the web page of this machine.
Opening the web page(P.200)
2
Log in as an administrator.
Logging in as an administrator(P.200)
3
Select [Admin Setup].
4
Select [Network] - [Security] - [SSL/TLS].
5
Select [Enable] for the protocol you want to apply the encryption to.
6
Click [Submit].
To Next Page
Loading...
Need help?
General
