Omron CJ2-CPU User Manual

2 Features and System Configuration
2 - 4
NX-series EtherNet/IP Coupler Unit User’s Manual (W536)
Moreover, setup of the safety control system is integrated into the Sysmac Studio software. Using
Sysmac Studio brings consistent operating procedures together with various types of debugging,
including monitoring, changing present values, and forced refreshing.
 Easy Creation of an Interface with the Standard Controls
You can exchange data between the safety controls that are based on the Safety CPU Unit and the
standard controls that are based on the EtherNet/IP Unit.
This allows you to maintain the independent nature of the previously separate safety controls and
standard controls while easily interfacing monitoring and commands between them.
 Excellent Connectability with OMRON Safety I/O and Standard I/O Devices
You can directly connect OMRON’s wide lineup of Safety I/O Devices to Safety I/O Units without
using any special Units. Additionally, you can connect an extensive range of NX I/O Units such as
Digital I/O, Analog I/O, Temperature Input, Position Interface, and IO-Link Master Units.
 Integrating Setting and Debugging Operations for Safety Controls into the
Sysmac Studio
Setting and debugging operations for safety controls are integrated into the Sysmac Studio soft-
ware. The shared concepts, such as IEC 61131-3, consistent operating procedures, one-project
management, integrated debugging, and integrated troubleshooting, reduce the software workload.
You can connect the Sysmac Studio to perform various types of debugging, including monitoring,
changing present values, and forced refreshing.
Additional Information
Refer to the NX-series Safety Control Unit User’s Manual (Cat. No. Z930) for details on safety
control systems built with Safety Control Units.

Omron CJ2-CPU Specifications

General

Brand	Omron
Model	CJ2-CPU
Category	Controller
Language	English