1 Introduction
1 - 2
E5@C-T Digital Temperature Controllers User’s Manual (H185)
1-1 Appearance, Features, and
Functions of the E5@C-T
This section compares the features of the E5@C-T with the previous E5@N-HT Controllers.
Input sampling cycle: 50 ms
Control period: 0.1 s and 0.2 s have been added.
Integral/differential time unit: Setting in increments of 0.1 s has been added.
• Number of event inputs: Increased from 2 to 4 for the E5CC-T and from 4 to 6 for the
E5EC-T/E5AC-T.
• Number of auxiliary outputs: Increased from 2 to 3 for the E5CC-T and from 3 to 4 for the
E5EC-T/E5AC-T.
Digit shift: When setting the SP or other parameters, you can use a Shift Key (i.e.,
the PF Key) to shift the digit that is being set to aid in changing the set
values.
This port allows you to change or set parameters from the Setup Tool even when the Controller is
installed in a panel.
1-1-1 Appearance
• A stylish design that
gives a new look to
control panels.
• Large display characters
and white backlight for
better visibility.
• A compact size to help
downsize control panels.
• Much faster sampling
and greater expandability
than expected in this
class of Controller.
• Even easier to use than
previous models.
1-1-2 Features
High-speed Control Capability
I/O Expandability
Easier Numeric Inputs with a Digit Shift Key
Setup Tool Port on Front Panel of the E5EC-T/E5AC-T
E5CC-T E5EC-T E5AC-T
To Next Page
Loading...
Need help?
General
