Omron E5AC-T User Manual

5 - 21
5 Advanced Operations
E5@C-T Digital Temperature Controllers User’s Manual (H185)
5-7 Hiding Parameters
5
5-7-1 Parameter Mask Settings
5-7 Hiding Parameters
You can use a key operation to hide parameters that do not need to be displayed. This allows you to
prevent incorrect settings for parameters or to simplify the parameter configuration according to the
application.
z Parameters
z Description
• If you set the Parameter Mask Setting parameter (Advanced Function Setting Level) to ON,
Parameter Mask Mode is entered.
• When you enter Parameter Mask Mode, the first parameter in the Operation Level is displayed.
• When you press the O Key, the setting level changes as shown below.
* You cannot mask parameters in the Manual Control Level, Monitor/Setting Item Level, and Protect Level.
• Press the M Key once for less than one second to move to the next parameter in the current
setting level.
Press the M Key for at least one second to move to the previous parameter in the current setting
level.
• Press the U or D Key to set disp (disable mask (show)) or mask (enable mask (hide)).
• Perform one of the following operations to end Parameter Mask Mode.
1. Cycle the power supply.
2. Send a Software Reset command with communications.
3. Press O Key for at least one second.
• When you enter Parameter Mask Mode, the first parameter in the Operation Level is displayed.
However, you cannot set a parameter mask for the Process Value/Set Point 1 and Process
Value/Set Point 2 parameters.
5-7-1 Parameter Mask Settings
Display Parameter Application Level
pmst Parameter Mask Settings Moves you to the Parameter Mask Mode.
Advanced Function
Setting Level
pmsk Parameter Mask Enable Enables and disables parameter masks. Protect Level
Operation
Level
Adjustment
Level
PID Setting
Level
Program
Setting Level
Advanced Function
Setting Level
Communications
Setting Level
Initial Setting
Level

Omron E5AC-T Specifications

General

Brand	Omron
Model	E5AC-T
Category	Temperature Controller
Language	English