A Appendices
A - 22
E5@C-T Digital Temperature Controllers User’s Manual (H185)
A-6-4 PID Setting Level
Parameters Characters Setting (monitor) value Display Default Unit
Display PID Selection d.pid 1 to 8 Currently
selected PID
set number
PID * Proportional
Band
*.p Temperature input: 0.1 to 999.9 8.0 °C or °F
Analog input: 0.1 to 999.9 10.0 %FS
PID * Integral Time *.i Standard,
heating/cooling, or close
position-proportional
control:
Integral/derivative time
unit of 1 s: 0 to 9,999
233 Seconds
Integral/derivative time
unit of 0.1 s: 0.0 to 9,999
233.0 Seconds
Floating
position-proportional
control:
Integral/derivative time
unit of 1 s: 1 to 9,999
233 Seconds
Integral/derivative time
unit of 0.1 s: 0.1 to 9,999
233.0 Seconds
PID * Derivative Time *.d Integral/derivative time unit of 1 s: 0 to 9,999
Integral/derivative time unit of 0.1 s: 0.0 to 9,999
40
40.0
Seconds
PID * Proportional
Band (Cooling)
*.c-p Temperature input: 0.1 to 999.9 8.0 °C or °F
Analog input: 0.1 to 999.9 10.0 %FS
PID * Integral Time
(Cooling)
*.c-i Integral/derivative time unit of 1 s: 0 to 9,999
Integral/derivative time unit of 0.1 s: 0.0 to 999.9
233
233.0
Seconds
PID * Derivative Time
(Cooling)
*.c-d Integral/derivative time unit of 1 s: 0 to 9,999
Integral/derivative time unit of 0.1 s: 0.0 to 999.9
40
40.0
Seconds
PID * Dead Band *.cdb Temperature input: −199.9 to 999.9 0.0 °C or °F
Analog input: −19.99 to 99.99 0.00 %FS
PID * Manual Reset
Value
*.ofr 0.0 to 100.0 50.0 %
PID * MV Upper Limit *.olh Standard: MV lower limit + 0.1 to 105.0
Heating/cooling: 0.0 to 105.0
100.0 %
Close position-proportional control:
MV lower limit + 0.1 to 105.0
PID * MV Lower Limit *.oll Standard: −5.0 to MV upper limit − 0.1 0.0 %
Heating/cooling: −105.0 to 0.0 −100.0
Close position-proportional control:
−5.0 to MV upper limit − 0.1
0.0
PID * Automatic
Selection Range Upper
Limit
*.aut Temperature input: −1,999 to 9,999 0 EU
Analog input: −5.0 to 105.0 105.0 %
PID * LBA Detection
Time
*.lba 0 to 9,999 0 Seconds
To Next Page
Loading...
Need help?
General
