CHAPTER 6 USING THE COMMUNICATIONS FUNCTION
E5CK
6–16
End code
13
Code name
FCS error
The FCS (Frame Check Sequence) do not match.
Check the FCS program.
End code
14
Code name
Format error
The received command length does not match the length defined in the
frame format.
Check the communications conditions. If the communications conditions
of the host computer and E5CKĆT controller match, then a probable cause
is a problem in the communications circuit of one or both of the host comĆ
puter and E5CKĆT controller.
End code
15
Code name
Setting range error
Numerical values or code values in the data are not within the setting
range.
Check the parameter and read or write data of special commands.
JUndefined error
CR
Unit
No.
FCS
@
*
2B
2B 2B 2B
CI
Ă• An undefined header code has been received.
Ă• A currently invalid parameter (e.g. the scaling command during temperĆ
ature input) has been received.
Ă• Check the parameter No.
F Description
F Action
F Description
F Action
F Description
F Action
F Description
F Action
To Next Page
Loading...
Need help?
General
