Omron E5CK User Manual

CHAPTER 5 PARAMETERS
E5CK
5–2
JThe meaning of icons used in this chapter
Describes the functions of the parameter.
Describes the range and defaults of the parameter setting.
Used for monitorĆdedicated parameters.
Describes the range of the monitor values.
Describes a procedure using parameters in operating instructions.
Describes related parameters and items.
Describes models of the E5AKĆT or optional units that support the parameter being
described.
JAbout parameter display
On the E5CKĆT controller, only parameters that can be used are displayed. These parameters are
displayed only when the Conditions of Use" on the right of the parameter heading are satisfied.
However, note that the settings of protected parameters are still valid, and are not displayed
regardless of the conditions of use.
Conditions of Use
The controller must
be in operation.
AT Execute/cancel
JAbout the Order in Which Parameters Described in This Chapter
Parameters are described mode by mode
The first page of each mode lists the parameters available in that mode. The parameter names
in these contents are listed in the order that they are displayed on the controller.
Conventions Used in this Chapter
Function
Setting
Monitor
Example
of use
See
Model

Omron E5CK Specifications

General

Brand	Omron
Model	E5CK
Category	Controller
Language	English