Omron E5GC User Manual

4 - 7
4 Basic Operation
E5@C Digital Temperature Controllers User’s Manual (H174)
4-1 Moving between Setting Levels
4
4-1-5 Moving to the Communications Setting Level
 Moving from the Operation Level to the Communications Setting Level
 Moving from the Communications Setting Level to the Operation Level
4-1-5 Moving to the Communications Setting Level
1 Press the O Key for at least 3 seconds in the Operation Level.
The No. 1 display will flash when the keys are pressed for 1 s or
longer. The display will change from the Operation Level to the
Initial Setting Level.
Operation Level
2 Press the O Key for less than 1 second in the Initial Setting
Level.
Initial Setting Level
The display will change from the Initial Setting Level to the
Communications Setting Level.
Communications Setting
Level
1 Press the O Key for less than 1 second in the
Communications Setting Level.
The display will change from the Communications Setting Level to
the Initial Setting Level.
Communications Setting
Level
2 Press the O Key for at least 1 second in the Initial Setting
Level.
Initial Setting Level
The display will change from the Initial Setting Level to the
Operation Level.
Operation Level
0
25
5
in-t
Input Type
cwf
psel
Protocol Setting
cwf
psel
5
in-t
Input Type
0
25
PV/SP

Omron E5GC Specifications

General

Brand	Omron
Model	E5GC
Category	Temperature Controller
Language	English