Omron R88D-KN10F-ECT-L User Manual

3 Specifications
3 - 36
G5-series Linear Motors/Servo Drives With Built-in EtherCAT Communications
*1 The amplitude may be increased by machine resonance. As a guideline, do not exceed 80% of the specified
value.
*2 Disconnect all connections to the Linear Motor before attempting a megameter test (insulation resistance
measurement) on a Linear Motor. Failure to follow this guideline may result in damaging the Linear Motor. In
addition, never perform dielectric strength tests on the Linear Motor. Failure to follow this guideline may result
in damaging the internal elements.
The following tables show the performance specifications of various ironless Linear Motor models.
3-3-5 General Specifications of Ironless Linear Motors
Item Description
Operating ambient temperature humidity 0ºC to 40ºC, 20% to 80% (with no condensation)
Storage ambient temperature and humidity –20ºC to 65ºC, 85% max. (with no condensation)
Operating and storage atmosphere No corrosive gases
Vibration resistance
*1
Acceleration of 49 m/s
2
max. in X, Y, and Z directions
Impact resistance
Acceleration of 98 m/s
2
max. 3 times each in X, Y, and Z
directions
Insulation resistance
*2
Between power terminal and FG terminal: 10 MΩ min. (at
500 VDC)
Dielectric strength
Between power terminal and FG terminal: 2,250 VDC for 1 s
Between power terminal and sensor: 2,250 VDC for 1 s
Protective structure IP00
Maximum coil temperature (Motor Coil Unit) 110°C
Maximum magnet temperature (Magnet Track) 70°C
Insulation class Class B
Cooling method Self-cooling
3-3-6 Performance Specifications of Ironless Linear Motors
R88L-EC-GW-0303/-0306/-0309
Motor Coil Unit (R88L-EC-GW--ANPS)
0303 0306 0309
Servo Drives (R88D--ECT-L)
KN01L KN02H KN04L KN08H KN10H
Applicable Servo Drives input voltage 100 VAC 200 VAC 100 VAC 200 VAC 200 VAC
Maximum speed (100 VAC)m/s8–8––
Maximum speed (200 VAC) m/s – 16 – 16 16
Continuous force
*1
N26.5 53 80
Momentary maximum force
*2
N 100 96 200 300
Continuous current
*1
Arms 1.33 2.66 4.0
Momentary maximum current
*2
Arms 5.0 4.8 10.0 15.0
Motor force constant N/Arms 19.9 19.9 19.9
Back electromotive force V·s/m 6.6 6.6 6.6
Motor constant N/√W 4.90 6.93 8.43
Phase resistance Ω 5.5 2.8 1.8
Phase inductance mH 1.8 0.9 0.6
Electrical time constant ms 0.35 0.35 0.35

Omron R88D-KN10F-ECT-L Specifications

General

Brand	Omron
Model	R88D-KN10F-ECT-L
Category	Servo Drives
Language	English