Omron R88D-KN10F-ECT-L User Manual

2 Models and External Dimensions
2 - 8
G5-series Linear Motors/Servo Drives With Built-in EtherCAT Communications
*1 The continuous force is subject to temperature conditions. For details, refer to 3-3-6 Performance
Specifications of Ironless Linear Motors on page 3-36.
The following table shows appropriate combinations with G5-series AC Servo Drives and Linear
Motors.
Note The maximum operation speed is restricted by the guide mechanism, encoder, and other aspects. If it is
5 m/s or higher, please consult with your OMRON representative.
Ironless Linear Motors
Motor Coil Unit model
Continuous
force
*1
[N]
Momentary
maximum force
[N]
Magnet Track model
R88L-EC-GW-0303-ANPS 26.5 100 R88L-EC-GM-03090-A
R88L-EC-GM-03120-A
R88L-EC-GM-03390-A
R88L-EC-GW-0306-ANPS 53 200
R88L-EC-GW-0309-ANPS 80 300
R88L-EC-GW-0503-ANPS 58 240 R88L-EC-GM-05126-A
R88L-EC-GM-05168-A
R88L-EC-GM-05210-A
R88L-EC-GM-05546-A
R88L-EC-GW-0506-ANPS 117 480
R88L-EC-GW-0509-ANPS 175 720
R88L-EC-GW-0703-ANPS 117 552 R88L-EC-GM-07114-A
R88L-EC-GM-07171-A
R88L-EC-GM-07456-A
R88L-EC-GW-0706-ANPS 232 1,110
R88L-EC-GW-0709-ANPS 348 1,730
2-3-3 Servo Drive and Linear Motor Combination Tables
Iron-core family
Motor Coil Unit model Voltage [V] Servo Drive model
Maximum speed
[m/s]
R88L-EC-FW-0303-ANPC 100 R88D-KN01L-ECT-L 2.5
200 R88D-KN02H-ECT-L 5
400 R88D-KN06F-ECT-L 10
R88L-EC-FW-0306-ANPC 100 R88D-KN02L-ECT-L 2.5
200 R88D-KN04H-ECT-L 5
400 R88D-KN10F-ECT-L 10
R88L-EC-FW-0606-ANPC 100 R88D-KN04L-ECT-L 2
200 R88D-KN08H-ECT-L 4
400 R88D-KN15F-ECT-L 8
R88L-EC-FW-0609-ANPC 200 R88D-KN10H-ECT-L 4
400 R88D-KN20F-ECT-L 8
R88L-EC-FW-0612-ANPC 200 R88D-KN15H-ECT-L 4
400 R88D-KN30F-ECT-L 8
R88L-EC-FW-1112-ANPC 200 R88D-KN15H-ECT-L 2
400 R88D-KN30F-ECT-L 4
R88L-EC-FW-1115-ANPC 200 R88D-KN15H-ECT-L 2
400 R88D-KN30F-ECT-L 4

Omron R88D-KN10F-ECT-L Specifications

General

Brand	Omron
Model	R88D-KN10F-ECT-L
Category	Servo Drives
Language	English