3 - 17
3 Specifications
G5-series Linear Motors/Servo Drives With Built-in EtherCAT Communications
3-1 Servo Drive Specifications
3
3-1-11 External Encoder Connector Specifications (CN4)
These are the specifications of the connector that connect with the external encoder.
*1 Connect external encoder signals to the serial interface (+EXS/–EXS) or 90° phase difference inputs according
to the encoder type.
z Connectors for CN4 (10 Pins)
3-1-11 External Encoder Connector Specifications (CN4)
Pin No.
Symbol
Name Function and interface
1 E5V External encoder power
supply output
External encoder power supply: 5.0 VDC ± 5%, 250 mA max.
If the above capacity is exceeded, provide an appropriate power
supply.
2 E0V This is connected to the control circuit ground connected to
connector CN1.
3 +EXS External encoder signal
I/O (serial signal)
This is an external encoder serial bi-directional signal.
(Conforms to EIA485)
*1
Maximum response frequency: 400 Mpps
4–EXS
5 +EXA External encoder signal
90° phase difference input
(Phases A, B and Z)
This is an external encoder 90° phase difference input signal.
*1
Maximum response frequency: 4 Mpps (quadruple multiplier)
6–EXA
7 +EXB
8–EXB
9 +EXZ
10 –EXZ
Shell FG Frame ground Frame ground
Name Model Manufacturer OMRON model number
MUF Connector MUF-PK10K-X J.S.T. Mfg. Co., Ltd. R88A-CNK41L
t1
t1
t1
t1
t2
t1>0.25 μs
t2>1.0 μs
EXA
EXB
To Next Page
Loading...
Need help?
General
