512
Conversion Instructions Section 3-12
With CPU Units with unit version 4.0 of later, there are instructions to convert
ASCII to 4, 8, and 16 digits of numeric data (NUM4(517), NUM8(520), and
NUM16(522)).
3-12-12COLUMN TO LINE: LINE(063)
Purpose Converts a column of bits from a 16-word range (the same bit number in 16
consecutive words) to the 16 bits of the destination word.
Ladder Symbol
Variations
Applicable Program Areas
Operands S: First Source Word
Specifies the first source word. S and S+15 must be in the same data area.
N: Bit Number
Specifies the bit number (0000 to 000F or &0 to &15) to be copied from the
source words.
S: D00100
D: D00300
Number of bytes (2 bytes)
Starting digit (digit 1)
Parity bits: Result in even parity
Not chan
ed
Not changed
Conversion
Parity: Even
Starting byte: rightmost
Starting digit in D: Digit 1
Number of bytes: 2
Starting byte in S: Rightmost
LINE(063)
S
N
D
S: First source word
N: Bit number
D: Destination word
Variations Executed Each Cycle for ON Condition LINE(063)
Executed Once for Upward Differentiation @LINE(063)
Executed Once for Downward Differentiation Not supported
Immediate Refreshing Specification Not supported
Block program areas Step program areas Subroutines Interrupt tasks
OK OK OK OK
To Next Page
Loading...
Need help?
General
