Omron SYSMAC CJ - REFERENCE MANUAL 08-2008 User Manual

471
Symbol Math Instructions Section 3-11
3-11-23SIGNED BINARY DIVIDE: /(430)
Purpose Divides 4-digit (single-word) signed hexadecimal data and/or constants.
Ladder Symbol
Variations
Applicable Program Areas
Operand Specifications
/(430)
R
Dd
Dr
Dd: Dividend word
Dr: Divisor word
R: Result word
Variations Executed Each Cycle for ON Condition /(430)
Executed Once for Upward Differentiation @/(430)
Executed Once for Downward Differentiation Not supported.
Immediate Refreshing Specification Not supported.
Block program
areas
Step program
areas
Subroutines Interrupt tasks
OK OK OK OK
Area Dd Dr R
CIO Area CIO 0000 to CIO 6143 CIO 0000 to
CIO 6142
Work Area W000 to W511 W000 to W510
Holding Bit Area H000 to H511 H000 to H510
Auxiliary Bit Area A000 to A959 A448 to A958
Timer Area T0000 to T4095 T0000 to T4094
Counter Area C0000 to C4095 C0000 to C4094
DM Area D00000 to D32767 D00000 to
D32766
EM Area without bank E00000 to E32767 E00000 to
E32766
EM Area with bank En_00000 to En_32767
(n = 0 to C)
En_00000 to
En_32766
(n = 0 to C)
Indirect DM/EM
addresses in binary
@ D00000 to @ D32767
@ E00000 to @ E32767
@ En_00000 to @ En_32767
(n = 0 to C)
Indirect DM/EM
addresses in BCD
*D00000 to *D32767
*E00000 to *E32767
*En_00000 to *En_32767
(n = 0 to C)
Constants #0000 to #FFFF
(binary)
#0001 to #FFFF
(binary)
---
Data Registers DR0 to DR15 ---

Omron SYSMAC CJ - REFERENCE MANUAL 08-2008 Specifications

General

Brand	Omron
Model	SYSMAC CJ - REFERENCE MANUAL 08-2008
Category	Controller
Language	English