51
Function
00 NUMBER OF PRINTS Sets the default number of prints. 1
1-999
01 PAPER SIZE Sets the default paper size setting. A4
A3 / B4 / A4 / B5 / A5 / LEDGER / LEGAL /
LETTER / INVOICE / FLS1 / FLS2
02 PAPER TRAY Sets the default Paper Tray selection. Auto
Auto / BYPASS / TRAY-1 / TRAY-2 / TRAY-3 / TRAY-4
03 PRINT DIRECTION Sets the default print orientation setting. 1:PORTRAIT
1:PORTRAIT / 2:L-SCAPE
04 PRINT DATA Determines the provision of the print data.
PRESS SET TO PRINT
05 2-SIDED PRINT Selects whether the 2-Sided print setting is 1:OFF
enabled.
1:OFF / 2:ON
06 BIND POSITION Sets the default bind position. 1:LONG EDGE
1:LONG EDGE / 2:SHORT EDGE
07 RESOLUTION Sets the default resolution setting. 2:600dpi
1:300dpi / 2:600dpi / 3:1200dpi
08 FONT (PCL)
∗
1
Sets the default PCL font. 0
0-99
09 SYMBOL TABLE (PCL)
∗
1
Sets the default PCL symbol table. 11
0-35
10 PITCH (PCL)
∗
1
Sets the default PCL pitch. 10.00
0.44-99.99
11 POINT SIZE (PCL)
∗
1
Sets the default PCL point size. 12.00
4.00-999.75
12 LINES/PAGE (PCL)
∗
1
Sets the default PCL lines/page. 60
5-128
13 RETURN CHARACTER (PCL)
∗
1
Sets the default PCL return character. 1:CR
1:CR / 2:CR+LF
14 MUTUAL A4/LETTER Selects whether the mutual size A4/LETTER is 1:OFF
enabled.
1:OFF / 2:ON
15 MAILBOX MEMORY
∗
2
Indicates the mailbox memory status.
PRESS SET TO SELECT
19 KEY OPERATOR MODE Inputs the key operator password.
ENTER PASSWORD =
■ Printer Settings
No.
Modes Function
Initial
Setting
10 TONER SAVE (T/P) Selects the Toner Save Level to use for the 1:NONE
Text/Photo mode.
1:NONE / 2:LEVEL1 / 3:LEVEL2
11 TONER SAVE (PHOTO) Selects the Toner Save Level to use for the 1:NONE
Photo mode.
1:NONE / 2:LEVEL1 / 3:LEVEL2
12 SADF DEFAULT Selects whether the Job Build and SADF Mode 1:OFF
is enabled.
1:OFF / 2:ON
No.
Modes Function
Initial
Setting
∗1Available only when the optional Printer Controller Module is installed.
∗2Available only when the optional Hard Disk Drive Unit is installed.
To Next Page
Loading...
Need help?
General
