Hunter-Pro 832/8144 & Captain 8 User Guide
4 Key #3: How to Bypass Zones
You use the zone bypass option when you need to enter a part of the protected area while the
system is armed. You can bypass zones only temporarily and only when the system is disarmed: a
zone can be bypassed only for one arming and it returns to normal mode when the system is
disarmed again.
The letter “B” in “Fast zone display" mode indicates a bypassed zone.
A service technician can bypass a zone permanently, in the case the zone is no longer needs to
be protected.
When you bypass a zone, you reduce the security protection of your
premise: a bypassed zone does not activate the alarm when violated!
Use this feature only if there is no other way, and only for the
shortest possible time
If need to bypass a faulty zone, call a service technician
To bypass a zone for the next arming, do the following:
1. Enter the user menu and press
2. Press a zone number
3. Press to confirm. The zone is bypassed immediately and the message “Bypassed
zone” is displayed.
4. To cancel the bypassing of a zone, press . The message “Activated zone” is displayed.
As a precaution, a zone can be bypassed only for a limited time, before returns to normal mode.
Example for bypassing a zone
Example for resetting a bypassed zone
Zone Number: 1
Entr-Conf #-Rst
Bypassed Zone
Back door -14
Zone name Zone number
Activated Zone
Back door -14
Zone name Zone number
To Next Page
Loading...
Need help?
General
