Pima Captain 8 User Manual

22
Hunter-Pro 832/8144 & Captain 8 User Guide
Each letter represents an action. The letters are:
Letter
Action
Description
U
Code Programming
The user can set/change user codes
T
Tel. Programming
The user can set/change phone numbers
C
Date Programming
The user can set/change time and date
M
Memory view
The user can view the memory log
B
Zone Bypass
The user can bypass zones (temporary)
K
Use any Keypad
The user can use any keypad, regardless of the partitions to
which the keypad is assigned
A
Auto-arming Prog
The user can set or change the auto-arming time
O
OP/CL Report-SMS
The user will receive arming/disarming reports by SMS
R
Remote control
In Hunter-Pro Series only: the user can control the system
by the phone
W
RFID tag + Code
The user will have to enter its code, when it disarms the
system with an RFID device
When a user tries to enter a sub-menu it is not allowed to access, an “Access
Denied” message is displayed
9.5 How to set user disarming window
A user can be restricted from disarming the system outside a time window. If that user will try to
disarm the system outside its time window, it will be denied with the message “Access Denied!
Press END”.
To set a time window per user, do the following:
1. Enter the user menu and press
2. Enter a user no. and press
3. Press x4
4. Press
5. Enter the start and end time of the time window, in the following format: hh:mm
6. Press to save
To correct data, press /
Example
The user “Karen D.” can disarm the system only between 07:30-09:30 (7:30-9:30 AM):
9
CODES
NE XT
EN TR
NE XT
Disarm Window
ENTER/NEXT/END
EN TR
User 1
00:00 To 23:59
EN TR
NE XT
BACK

Pima Captain 8 Specifications

General

Brand	Pima
Model	Captain 8
Category	Security System
Language	English