FORCE Series Installation Guide
34 PIMA Electronic Systems
10 General Settings
Following are the parameters of the
General Settings
menu:
User text, up to 16 characters.
User text, up to 24 characters. The text is displayed when
pressing and holding 0 (zero).
Date to display appropriate message onscreen
Use the Arm Away, Home1, and number keys to arm, without any
password.
Alarm messages will be displayed when the control panel is
armed.
Closing any delayed zone during the exit delay, terminates the
delay.
No exit delay when arming in Home 1-4 modes
Selected: setting CMS 2 parameters + code is enabled
Unselected: setting CMS 2 parameters + code is enabled only
by using the Master technician code.
Open zones are automatically bypassed when auto-arming
Selected: momentary key switch
Unselected: toggle key switch
Allows arming with a keyfob with open zones and faults
No beep
Always: the siren will sound a beep, whenever the alarm
system is armed.
With Key switch/Key fob: the siren will sound a beep, when
the alarm system is armed with a key switch or key fob.
No beep
Always: the siren will sound 2 beeps, whenever the alarm
system is disarmed.
With Key switch/Key fob: the siren will sound 2 beeps, when
the alarm system is armed with a key switch or key fob.
Always+Alarm in Memory: the siren will sound 3 beeps,
whenever the alarm system is disarmed, if the alarm was
triggered when the system was armed.
With Key Switch/Key fob+Alarm in Memory: the siren will
sound 3 beeps, whenever the alarm system is disarmed with a
key fob or key switch, if the alarm was triggered when the
system was armed.
To Next Page
Loading...
Need help?
General
