Pima FORCE Installation Guide

Chap. 2: Installation & Wiring
21
Figure 18. KLT/KLR500 connection diagram
2.13 GSM add-on, GSM501
The GSM add-on is used for transmitting reports and notifications from the FORCE to the CMS
and the contacts, via cellular network. It is a Quad-band transceiver. An external antenna
(long/short) can be used with the GSM501.
2.13.1 Main features
 4 bands: 850/900/1800/1900 MHz
 Current consumption: 30mA in idle state, 200mA when broadcasting.
 Antenna connection type: SMA
 The GSM add-on requires a SIM card, which should be purchased separately.
2.13.2 The LEDs
The GSM module has 2 LEDs: network registration and voltage. The LEDs states are:
LED
State
Indication
Network
Registration
(Red)
Flashes rapidly
Initializing
Flashes once every 3 sec.
SIM registered
Flashes once every 1 sec.
SIM not registered
Off
SIM missing or power loss
Modem Power
(Green)
Illuminates
Power OK
Off
Power loss

Pima FORCE Specifications

General

Brand	Pima
Model	FORCE
Category	Security System
Language	English