Pima FORCE Installation Guide

Force Security System - Installation Guide
42
Chap. 11 General Settings
Following is the parameters of the General Settings menu:
Parameter
Details
System Name
Appears in contacts’ notifications. User text, up to 16 characters.
Service Provider
User text, up to 24 characters. The text is displayed when pressing and
holding 0 (zero).
Contract Expiration
Date to display appropriate message onscreen
Technician Code
Change code, 4-6 digits.
 One Key Arming
Arming with the Arm Away+Home1 keys (,) , with no passwords is
enabled.
 Display Alarms at
Arm
Alarm messages will be displayed when the control panel is armed.
 Final Door
Arming
Closing any delayed zone during the exit delay, terminates the delay.
 Home Modes-
Instant
No exit delay when arming in Home 1-4 modes
 Additional CMSs
 Selected: setting CMS 2 parameters + code is enabled
 Unselected: setting CMS 2 parameters + code is enabled only by
using the Master technician code.
 Zone Bypass-
Auto Arm
Open zones are automatically bypassed when auto-arming
 Momentary Key
 Selected: momentary key switch
Unselected: toggle key switch
 Beep on Arming
 Any Arming: the siren will sound a beep, whenever the alarm system
is armed.
 Key switch/Key fob: the siren will sound a beep, when the alarm
system is armed by key switch or key fob.
 Inactive
 Beep on
Disarming
 Any Disarming: the siren will sound 2 beeps, whenever the alarm
system is disarmed.
 Key switch/Key fob: the siren will sound 2 beeps, when the alarm
system is armed by key switch or key fob.
 Any+Alarm in Memory: the siren will sound 3 beeps, whenever the
alarm system is disarmed, if the alarm was triggered when the
system was armed.
 Key Switch+Alarm Mem: the siren will sound 3 beeps, whenever the
alarm system is disarmed using keyfob or key switch, if the alarm
was triggered when the system was armed.
 Inactive
 Arm Prevention -
Faults
See below.

Pima FORCE Specifications

General

Brand	Pima
Model	FORCE
Category	Security System
Language	English