Pima FORCE Installation Guide

Chap. 8: CMS & Communications
37
Parameter
Details
 Line Check at
Disarm
When the alarm system is disarmed dial tone will be checked every 1
minute.
 Callback No.
Set a telephone number for the control panel, to call the computer
running the Upload/Download software. This number is displayed in the
user menu under Remote Service . See the User guide for details (P/N
4410460).
8.5 Network Settings
System Configuration  CMS & Communications  Network Settings
Parameter
Details
 Network Connection
The control panel is connected to Ethernet network.
 DHCP
The control panel is automatically assigned with an IP address by
the router. If you don’t select it, enter a static IP address (next).
Static IP
Enter a valid IP address of the control panel. When the IP address is
set, the DHCP parameter is ignored (even if selected).
Netmask, DNS, Default
Gateway
Set these parameters.
Callback Address, Port
Set an IP address and port no. for the control panel to return a
session connection, in response to a request made by the FORCE
Manager software, or by a user (from the User Menu.)
8.6 GSM/GPRS Settings
System Configuration  CMS & Communications  GSM/GPRS Settings
Parameter
Details
 GSM Module
Select Installed , if the module is connected.
 Virtual Provider
Select if the SIM card’s provider is virtual.
Callback Address,
Port
Set an IP address and port no. for the control panel to send a connection
request, in response to a request made by the FORCE Manager software.
 APN 1 Settings
1) Name: user text, up to 16 characters.
2) Username, Password: obtain these from the service provider.

Pima FORCE Specifications

General

Brand	Pima
Model	FORCE
Category	Security System
Language	English