Pima FORCE Installation Guide

Force Security System - Installation Guide
30
Attribute
When selected...
 Alarm Re-
triggering
 Selected: if the zone is still open at the end of the alarm time, the
zone will retrigger the alarm, continue to activate the sirens and will
generate a new alarm report.
 Unselected: if the zone is still open when the alarm time elapses, it
will NOT retrigger the alarm (unless it is closed and re-opened).
This attribute can only be used, if the Trigger Sirens attribute
is selected too.
 Activate
Buzzer
The keypad’s buzzer will sound beeps throughout the alarm time
 User Bypass
Users are allowed to bypass the zone temporarily (for the next arming
session, or until the Zone Bypass Limit time elapses)
6.3 Copy Zones
System Configuration  Zones  Copy Zones
Select between copying a single zone’s attributes, type, partitions, and name to one or more
zones, and copying succeeding zones to a different location.
1) Single to Multiple: see below.
2) Multiple to Multiple: see below.
6.3.1 Single to Multiple
1) Select the zone to be copied and to which zone/s.
2)  Copy Options:
Attribute
What will be copied
 Zone Attributes
The parameters from the zone attribute screen
 Zone Type
The zone type
 Zone Partitions
The partitions that the zone is allocated to
 Zone Name
The zone name
6.4 Multiple to Multiple
1) Define a group of consecutive zones to be copied.
2) Select a zone from which the zones will be copied to; for example, if you select to copy
zones 21-34 (14 zones) and select zone 47, the 14 zones will be copied to zones 47-60.
3)  Copy Options: see above.
6.5 Partitions Names
System Configuration  Zones  Partitions Names
Partitions can have unique names that will appear in the contacts reports and the event memory.
1) Use # or * to scroll and select the partition.
 Name: user text, up to 16 characters.

Pima FORCE Specifications

General

Brand	Pima
Model	FORCE
Category	Security System
Language	English